centrifugal slurry pumps SV(R) series

Short Description:

Discharge size range: 40mm to 300mm [1.5’’ to 12’’]

Flowrates to: 1000m3/hr [4,400GPM]

Heads to: 55m [180ft]

Product Detail

Product Tags

The SV/SVR pump range is heavy duty cantilever abrasion/corrosion resistant sump pump designed for extended wear life, reliability and durability. The heavy duty cantilever design makes the SV/SVR sump pump an ideal suit for continuous handling of abrasive and  corrosive slurries with the pump half submerged in sumps or pits.

Wetted components are available in a wide range of abrasion resistant high chrome alloys, corrosion resistant stainless steels and natural and synthetic elastomers [To suit special requirements, wet ends of SH(R) pumps can be fitted to SV(R) pump dry end] Heavy duty roller bearings installed above mounting plate protect the pump from submerged bearing failures No shaft seal is required due to the vertical cantilever design Suction strainer fitted inlet combined with the open impeller large passages reduce blockages risk

Leave Your Message

Write your message here and send it to us